Cruciate Repair Crimping System
 
$630.00
 
Includes all instruments shown/listed below
  (all items can be substituted)
These items can be purchased separately but, when purchased separately, the total cost of these instruments is $700.00
 1 - Surgical
Crimping Device
(will cut wire up to  2mm in size only)
OEL-29-701

 $199.00
1 - Universal
Tensioning Device

OEL-29-700

$299.00
9 - 80 Pound
Crimps
SEC-80CR &
6 - 40 Pound
Crimps
SEC-40CR
$4.00 Each

2 -24 inch pieces
40 pound  mono
line
AN-40-24
3 -24 inch pieces
80 pound  mono
line
AN-80-24
$6.00 per piece
1 -  Package of 8
assorted Cruciate
Needles
2 each - X-small,
small, medium,
large.

OEL-NAS
$20.00
1 - Cruciate
Needle Holder
18 cm (7”)
Tungsten
 Carbide
U-7416

$92.00


Cruciate Repair Crimping System
(J Style)
 
$504.18
 
Includes all instruments shown/listed below
    (all items can be substituted)
These items can be purchased separately but, the total cost would be $560.20

 1 - Crimping Device

OEL-J-710
  $165.00
1 - Tensioning Clamps

OEL-J-710R
$54.00
1 - Large Self-retaining
Retractor
18 cm (7”)
OEL-21-018
$99.00

1 - Cruciate
Needle Holder
18 cm (7”)
Tungsten
 Carbide
U-7416

$92.00
8 - 80 Pound
Crimps (JOR-80)
AND
6 - 40 Pound
Crimps (JOR-50)


$6.30 Each
3 - 24 inch pieces
40 pound mono
line
(AN-40-24)
4 - 24 inch pieces
80 pound  mono
line
(AN-80-24)
$6.00 per piece

1 Package of 8 assorted Cruciate Needles
2 each - X-small, small, medium, large.

OEL-NAS                            $20.00


Cruciate Ligament Pack
  
$380.70
 
Includes all instruments shown/listed below
(all items can be substituted) 
These items can be purchased separately but, when purchased separately, the total cost of these instruments is $423.00

1 – Baby Gelphi
Retractor
13 cm (5”)
OEL-21-460
$93.00
1 – Smilie
Menisectomy
Knife
OEL-29-132/02
$102.00
1 – Hohlman
Retractor

OEL-29-390
$61.00
1-Deschamps
Needle – Sharp
Right OR Left

Right-OEL-25-412
Left -OEL-25-410
$65.00 Each

1 - Martin
Cartilage Forceps
19 cm (7 ½”)

OEL-29-394/19

$102.00


Minor Orthopaedic Pack
  
$990.00
 
Includes all instruments shown/listed below
  (all items can be substituted)
These items can be purchased separately but, the total cost would be $1100.00

1 - Weitlaner
Self-retaining Retractor
16.5 cm (6 ½”)
OEL-21-420
  $95.00
1 – Stille Bone
Osteotome
20 cm X 10 mm

OEL-29-172
$64.00
1 - Kern Bone
Holding Forceps
17 cm (7”)

OEL-29-480
$147.00

1 – Friedmann
Bone Rongeur
14 cm (5 ½”)

OEL-820-10
$102.00
1 - Liston Bone
Cutting Forceps - Curved
17 cm (6 ¾”)  OEL-29-602  $185.00		 1-Wire Twister
Cutter
17 cm (6 ¾”)

OEL-25-365
 $93.00

1 - Putti
Bone Rasp
27 cm (11”) Rnd

UN-91472
$132.00
1 - Collins Bone
Mallet - S/S
20 cm (7 ¾”)

 OEL-29-220
$83.00
1 - Pin Chuck &
Key
17 cm with
11 cm extension
OSU-29-1103
$199.00


Surgical Crimping Device

OEL-29-701 $199.00
Will cut wire up to 2 mm in size only


Universal Tensioning Device



OEL-29-700 $299.00


Crimping Forceps

OEL-J-710 $165.00


Tensioning Clamps

OEL-J-710R $54.00


Cruciate Needle Holder

18 cm
(7")		 Tungsten Carbide U-7416 $92.00


Cruciate Needles



Large
 Pkg of 6
 OEL-NL $16.00
Medium
 Pkg of 6
 OEL-NM $16.00
Small
 Pkg of 6
 OEL-NS $16.00
X - Small
 Pkg of 6
 OEL-NXS $16.00
Assorted
 Package of 8
(2L-2M-2S-2XS)
 OEL-NAS $20.00


Cruciate Needles With Swedged-On Line
Pre-Sterilized and ready for use
X - Small
 40 lb line OEL-SW40XS $10.00
Small
 40 lb line OEL-SW40S $10.00
Small
 80 lb line OEL-SW80S $10.00
Medium
 40 lb line OEL-SW40M $10.00
Medium
 80 lb line
OEL-SW80M $10.00
Large
 40 lb line OEL-SW40L $10.00
Large
 80 lb line OEL-SW80L $10.00
Small
 40 lb double line
 OEL-SW40S2 $13.00
Small
 80 lb double line
 OEL-SW80S2 $13.00
Medium
 40 lb double line
 OEL-SW40M2 $13.00
Medium
 80 lb double line
 OEL-SW80M2 $13.00
Large
 80 lb double line
 OEL-SW80L2 $13.00


Surgical Implant Crimp Clamps
 
40 lb Round
 		SEC-40CR $4.00
80 lb Oval
 		SEC-80CR $4.00
50 lb 10 mm JOR-50 $6.30
80 lb 12 mm JOR-80 $6.30


Monofilament Line
(Tufts University Approved)

Hard Type - 50 yards
40 lb test
 AN-40 $21.00
80 lb test AN-80 $21.00
Mason line also available


Deschamps Ligature Needles
 
21cm x 14mm
(8 ½” x ½”)		 Left - Small
 OEL-25-406 $65.00
21cm x 22mm
(8 ½” x 1”) 		Left - Medium
 OEL-25-409 $65.00
21cm x 28mm
(8 ½” x 1 ¼”)		 Left - Large
 		OEL-25-410 $65.00
21cm x 22mm
(8 ½” x 1”)		 Right - Medium
 		OEL-25-411 $65.00
21cm x28mm
(8 ½” x ¾”)		 Right - Large
 OEL-25-412 $65.00


Tibia Hand Drill

Bit size: 2.7mm (7/64 in)
17 cm (6 3/4”) OSU-29-236 $81.00


Meniscus Probe

21.5 cm (8 1/2”)
2mm probe
 OSU-29-479 $23.00
1mm probe
 OSU-29-480 $21.00
Useful for manipulation of nerves and nerve roots. Also works well for mainpulation and examination of medical meniscus during CCL procedures. Fine, blunt end at right angle of long probe. Use 1mm in dogs under 30kg and 2mm for dogs over 30kg.


Stifle Bone Lever

22 cm (8 3/4”) OSU-29-235 $61.00
The caudal surface of the Stifle lever is contoured to fit the trochlea of large dogs. The tip atraumatically hooks behind the caudal aspect of the tibial plateau. The ring style handle in convenient for retraction, by using the thumb.


Micro Ligament Meniscus Clamp

14 cm (5 1/2”)
Straight
 OSU-29-2360 $170.00
Used for clamping and removing torn meniscus pieces. Intra articular structures are very difficult to grip in the presence of synovial fluid.  The micro serrations on this clamp make the task easier.


Micro Toothed Meniscus Clamp

12.5 cm (5”)
Curved
 OSU-29-2370 $36.00
The toothed mini-meniscus forceps are designed to grasp damaged meniscus tissue to facilitate removal using micro blades


Wallace Stifle Retractor

13 cm (5 ¼”) OSU-29-240 $135.00


Stifle Retractor

16 cm (6 ¼”) OSU-29-241 $213.00


Stifle Joint Retractor


12.5 cm (5")
 6 mm
profile		 OSU-29-242 $208.00


Steinmann Pins


Smooth
(Priced per individual unit)
Code
 Size
 Trocar Points
 		Price
EPN-1425 4.0mm X 250mm
(5/32” X 10”)		 1
 $13.00
EPN-1525 4.5mm X 250mm
(3/16” X 10”)
1
 $15.00


Smooth
(Priced per individual unit)
Code
 Size
 Trocar Points
 		Price
EPN-1315 3.0mm X 150mm
(1/8” X 6”) 
2
 $11.00
EPN-1325 3.0mm X 250mm
(1/8” X 10”)		 2
 $12.00
EPN-1415 4.0mm X 150mm
(5/32” X 6”)		 2
 $12.00
EPN-1515 4.5mm X 150mm
(3/16” X 6”)		 2
 $14.00
EPN-2215 2.0mm X 150mm
(5/64” X 6”)
 2
 $  9.00
EPN-2229 2.0mm X 290mm
(5/64” X 11 1/2”) 		2
 $10.00
EPN-2315 2.5mm X 150mm
(3/32” X 6”)
 2
 $  9.00
EPN-2329 2.5mm X 290mm
(3/32” X 11 1/2”)		 2
 $10.00


Centerface - Positive Thread Profile
(Priced per individual unit)
Code
 Size
 Mid
Thread
Diameter
 		Thread Length
 		Price
EPN-1315M 3.2mm X 150mm
(1/8” X 6”)
 4.8mm
(3/16")
 		32mm
(1 1/4")
 $13.00
EPN-1355M 4.8mm X 150mm
(3/16” X 6”) 		6.3mm
(1/4")
 		50mm
(2")
 $13.00
EPN-2315M 2.4mm X 150mm
(3/32” X 6”)
 3.5mm
(9/64")
 		20mm
(3/4")
 $13.00


Interface - Positive Thread Profile
(Priced per individual unit)
Code
 Size
 End
Thread
Diameter 		Thread Length
 		Price
EPN-1315E 3.2mm X 150mm
(1/8” X 6”)
 4.8mm
(3/16")
 		35mm
(1 3/8")
 $13.00
EPN-1355E 4.8mm X 150mm
(3/16” X 6”) 		6.3mm
(1/4")
 		50mm
(2")
 $13.00
EPN-2315E 2.4mm X 150mm
(3/32” X 6”)
 3.5mm
(9/64")
 		28mm
(1 1/8")
 $13.00


K-Wires
 

Smooth
(Priced per individual unit)
Code
 Size
 Trocar Points
 		Price
EPN-2015  1.0mm X 150mm
(5/128" X 6")
 2
 $  9.00
EPN-2029  1.0mm X 290mm
(5/128" X 11 1/2') 		2
 $10.00
EPN-2115  1.5mm X 150mm
(1/16" X 6") 		2
 $  9.00
EPN-2129  1.5mm X 290mm
(1/16" X  11 1/2')		 2
 $10.00


Steinmann Pin Ruler

17.5 cm (7”) OAR-V1587A $46.00


Screw & Wire Gauge

DSL-1609 $21.00
Useful for measuring screws bolts I.M. pins and K-wires, etc. Measures American wire gauge (AWG), English wire gauge (BWG), screw sizes 1/16” to 7/16” and No. 0 to No. 30. Stainless steel. Dimensions 4” long x 1 3/8” wide & 3” rule.


Hollow Wire Guide

45 mm (1 3/4”) OEL-KY205R $77.00


Lesser Wire Passer / Retriever

OSU-21-7740 $123.00
Designed to assist the surgeon in the placement of wire or nylon sutures.

The instrument has a number of functions:
• Locates the drill bit on the bone surface eliminating “drill skate”.
• Protects the soft tissues, preventing them from wrapping around the drill bit.
• Eases the passage of the suture through the hole
• Retrieves the suture material from the blind side as the forceps are removed.
• Suitable for drill bit sizes up to 2.5mm and wire up to 18 gauge


Cerclage Wire with Loops

30 cm  (12”)
0.8 mm
(21 gauge)		 EPNL-6008 $8.00
0.9 mm
(20 gauge) 		EPNL-6009 $8.00
1.0 mm
(19 gauge)		 EPNL-6010 $8.00
1.2 mm
(18 gauge)		 EPNL-6012 $8.00


Cerclage Wire

10 meter (33 ft.) rolls
0.2 mm
(36 gauge)		 EPN-6002 $12.00
0.3 mm
(30 gauge) 		EPN-6003 $12.00
0.4 mm
(27 gauge)		 EPN-6004 $12.00
0.5 mm
(25 gauge)		 EPN-6005 $12.00
0.6 mm
(23 gauge)		 EPN-6006 $12.00
0.7 mm
(22 gauge)		 EPN-6007 $12.00
0.8 mm
(21 gauge)		 EPN-6008 $12.00
0.9 mm
(20 gauge) 		EPN-6009 $12.00
1.0 mm
(19 gauge)		 EPN-6010 $12.00
1.2 mm
(18 gauge)		 EPN-6012 $12.00


Cerclage Wire Passer

A simple instrument for the passage of cerclage wire around fracture sites. Minimizes trauma to surrounding tissue. Saves surgical time & is double-ended for different bone sizes.
15 cm (6”) OSU-21-1105 $42.00


Graft Passer

2 cm(3/4") Diam.
15 cm (6") Long		 X-Small OSU-21-236 $95.00
3 cm(1 1/4") Diam.
16 cm (6 1/4") Long		 Small OSU-21-237 $95.00
4.5 cm(1 3/4") Diam.
18 cm (7") Long		 Medium
 OSU-21-238 $106.00
6 cm(2 1/4") Diam.
19.5 cm (7 3/4") Long		 Large
 OSU-21-239 $109.00


Sismeys Wire Introducer

14 cm (5 1/2") OAR-V1497 $148.00


Wire Twister-Cutter

With ratchet that locks jaws onto wire and
side hole to facilitate feeding of wire
15 cm    (6 ")
 Stainless
Steel
 OEL-25-365 $93.00


Wire Twister
With carbon insert jaws.
Used for seizing wire
18 cm (7") Tungsten
Carbide 		OEL-25-365T $161.00
13 cm (5") Tungsten
Carbide 		OEL-25-366T $127.00


Universal Wire Cutters

12 cm
(4 3/4")		 Stainless Steel OEL-13-380 $20.00


Wire Cutter

For cutting wires & pins up to 1.1mm (1/16”)
22 cm (8 1/4") U-7436 $250.00


Wire Cutter

17 cm
(6 3/4")		 Tungsten Carbide
Cuts 1.6mm (5/8") wire		 OEL-29-801 $166.00
22 cm
(8 3/4")		 Tungsten Carbide
Cuts 2.5mm (1") wire		 OEL-29-802 $234.00


Twister-Cutter

For bending and cutting wires only. Can be used in tandem with bone plate bender for contouring
smaller plates.  
18 cm (7")
 Parallel Action
 U-7400 $246.00


Flat Nose Pliers / Wire Twister
 
Longitudinal/Vertical Groove
17 cm (6 3/4") ONO-22-01-127 $134.00


Pliers
 
Slip Joint
20 cm (7 3/4") OEL-JO-21-996 $136.00


Vice Grips

18 cm (7") OEL-JO-21-1001 $125.00


Pin Cutter

47 cm (18 1/2") For cutting Kirschner wires, bolts,
tibia head screws and pins up to 6 mm diameter
OEL-29-805T $340.00


Enclosed Bone Pin Cutter

Covers a bone pin up to 4mm. The enclosed shearing action eliminates potentially dangerous flying pin ends & removes sharp points that can irritate soft tissue or cut the patient.
32 cm (12 1/2") OEL-29-1017 $224.00


T-Handle with Jacobs Chuck
 
12 cm (4 3/4") Handle
 Large Chuck
- Cannulated
 U-9090 $183.00


T-Handle with Jacobs Chuck

Smaller chuck - ideal for small dogs and cats
13 cm (5") Handle
 Small Chuck
- Cannulated
 U-9099 $238.00


Small Pin Chuck & Key

14 cm (5 1/2"
 OSU-29-1127
 $188.00
Lightweight, slotted handle to permit visibility of the pin resting in chuck. Ideal for small dogs and cats when using K-wires and small pins up to 5/32”


Pin Chuck & Key

Has open slot in handle permitting visibility of the pin allowing pin to be easily checked.
This saves surgery time.
17 cm (6 3/4") with 11 cm (4 1/4") extension Handle
Cannulated
 OSU-29-1103
 $199.00


Neutral Loaded Drill Guide
 
2.7mm for 2.7mm screw
use 2.0mm drill bit
 OES-80-471 $330.00 
3.5mm for 3.5mm screw
use 2.5mm drill bit
 OES-80-472 $330.00 
4.5mm for 4.5mm screw
use 3.2mm drill bit
 OES-80-473 $330.00 
To exert compression at a fracture site, the cortical screw must be positioned precisely in the slot in the compression plate. The load/neutral drill guide has two tips, one for compression (load) and one where no compression is exerted (neutral).


Mini Drill Guide Sleeve
 
Double-Ended
(1.5 – 2.0 mm drill bits)
 OES-80-465 $150.00 
Used with drills and taps to place accurate holes and protect surrounding tissue.


Tap Handle

Quick release tap handle (AO) Sythes style
 OES-80-400 $238.00 

Taps
2.0 tap
 OES-80-400A $85.00 
2.7 tap
 OES-80-400B $85.00 
3.5 tap
 OES-80-400C $85.00 
4.0 tap
 OES-80-400D $85.00 
4.5 tap
 OES-80-400E $85.00 


Tissue Protector Sleeves
 
For drill/taps to
2.0 mm 		OEL-J-415A $82.00 
For drill/taps to
2.7 mm		 OEL-J-415B $82.00 


Soft Tissue Protection Sleeves
 
For Drill/Taps 2.0mm OEL-29-3093/0 $102.00 
For Drill/Taps 2.7mm OEL-29-3093/1 $98.00 
For Drill/Taps 3.5mm OEL-29-3093/2 $99.00 
For Drill/Taps 4.5mm OEL-29-3093/3 $100.00 
Rotating pins, drills and taps will “pick up” soft tissue, skin, muscle, nerves and blood vessels causing serious damage. Use of tissue protection sleeves minimizes such damage. The teeth at the top of the guide locate on the bone while the stainless steel tube provides a barrier between soft tissue and implant equipment.


Small Pointed Drill Guide
Handle


OES-80-457 $124.00 

Enables the surgeon to exactly control the entry and exit of drill points.

Insert Drill Guides
OES-80-453
 Fits 1.5 - 2.0 mm Drill Bit
 $90.00 
OES-80-454
 Fits 2.4 - 2.7 mm Drill Bit
 $90.00 
OES-80-455
 Fits 2.7 - 3.2 mm Drill Bit
 $90.00 

To be used with the Small Pointed Drill Guide Handle


Twist Drills
 
1.75” X .052”
OES-5-3010
 $18.00 
5” X 1/16”
OES-5-3015
 $18.00 
5” X 5/64”
OES-5-3020
 $18.00 
5” X 3/32”
OES-5-3025
 $18.00 
5” X 7/64”
OES-5-3027
 $18.00 
5” X 1/8”
OES-5-3032
 $18.00 
5” X 9/64”
OES-5-3035
 $18.00 
5” X 5/32”
OES-5-3040
 $18.00 
5” X 3/16” 
OES-5-3045
 $18.00 


Phillips Head Screwdriver
 
OSU-21-267 $80.00


Lane Screwdriver

25 cm (9 3/4”) OEL-JO-21-266 $75.00


Hex Screwdriver
17 cm (6 1/2")

1.5 mm “HEX” tip
(fits 2.0mm screws)
 OEL-JO-21-268 $112.00
2.5 mm “HEX” tip
(fits 3.5mm screws)		 OEL-JO-21-269 $112.00
3.5 mm “HEX” tip
(fits 4.0mm screws)		 OEL-JO-21-270 $112.00


Screw Holding Forceps

For 2.0 & 2.7 mm
OEL-LS-040S $29.00


Screw Holding Forceps

For 2.7 & 3.5 mm
OES-29-642 $94.00


Bone Screw Depth Gauge

30 cm (12") OAR-V1589 $200.00


Countersink

For 2.0mm
 Countersink tip
1.2mm
 OES-80-383 $82.00
For 2.7 - 3.5mm
 Countersink tip
2.0mm
 OES-80-384 $82.00


Cortical Screws

Individually priced
2.0 mm x 6 mm OES-1-2006 $9.00 
2.0 mm x 8 mm OES-1-2008 $9.00 
2.0mm x 10 mm OES-1-2010 $9.00 
2.0mm x 12 mm OES-1-2012 $9.00 
2.0mm x 14 mm OES-1-2014 $10.00 
2.0mm x 16 mm OES-1-2016 $10.00 
2.0mm x 18 mm OES-1-2018 $11.00 
2.0mm x 20 mm OES-1-2020 $11.00 
2.7 mm x 6 mm OES-1-2706 $7.00 
2.7 mm x 8 mm OES-1-2708 $7.00 
2.7mm x 10 mm OES-1-2710 $7.00 
2.7mm x 12 mm OES-1-2712 $7.00 
2.7mm x 14 mm OES-1-2714 $8.00 
2.7mm x 16 mm OES-1-2716 $8.00 
2.7mm x 18 mm OES-1-2718 $8.00 
2.7mm x 20 mm OES-1-2720 $8.00 
2.7mm x 22 mm OES-1-2722 $9.00 
2.7mm x 24 mm OES-1-2724 $9.00 
3.5mm x 10 mm OES-1-3510 $7.00 
3.5mm x 12 mm OES-1-3512 $7.00 
3.5mm x 14 mm OES-1-3514 $7.00 
3.5mm x 16 mm OES-1-3516 $7.00 
3.5mm x 18 mm OES-1-3518 $7.00 
3.5mm x 20 mm OES-1-3520 $8.00 
3.5mm x 22 mm OES-1-3522 $8.00 
3.5mm x 24 mm OES-1-3524 $8.00 
3.5mm x 26 mm OES-1-3526 $8.00 
3.5mm x 28 mm OES-1-3528 $8.00 
3.5mm x 30 mm OES-1-3530 $9.00 
3.5mm x 32 mm OES-1-3532 $10.00 
3.5mm x 34 mm OES-1-3534 $10.00 
3.5mm x 36 mm OES-1-3536 $10.00 
3.5mm x 38 mm OES-1-3538 $10.00 
3.5mm x 40 mm OES-1-3540 $10.00 
3.5mm x 42 mm OES-1-3542 $12.00 
3.5mm x 44 mm OES-1-3544 $12.00 
3.5mm x 46 mm OES-1-3546 $12.00 
3.5mm x 48 mm OES-1-3548 $12.00 
3.5mm x 50 mm OES-1-3550 $12.00 


Self-Tapping Cortical Screws

Individually priced
2.0 mm x 6 mm OES-6-2006 $10.00 
2.0 mm x 8 mm OES-6-2008 $10.00 
2.0mm x 10 mm OES-6-2010 $10.00 
2.0mm x 12 mm OES-6-2012 $10.00 
2.0mm x 14 mm OES-6-2014 $11.00 
2.0mm x 16 mm OES-6-2016 $11.00 
2.0mm x 18 mm OES-6-2018 $11.00 
2.0mm x 20 mm OES-6-2020 $11.00 
2.7 mm x 6 mm OES-6-2706 $7.00 
2.7 mm x 8 mm OES-6-2708 $7.00 
2.7mm x 10 mm OES-6-2710 $7.00 
2.7mm x 12 mm OES-6-2712 $7.00 
2.7mm x 14 mm OES-6-2714 $8.00 
2.7mm x 16 mm OES-6-2716 $8.00 
2.7mm x 18 mm OES-6-2718 $8.00 
2.7mm x 20 mm OES-6-2720 $8.00 
2.7mm x 22 mm OES-6-2722 $9.00 
2.7mm x 24 mm OES-6-2724 $9.00 
3.5mm x 10 mm OES-6-3510 $7.00 
3.5mm x 12 mm OES-6-3512 $7.00 
3.5mm x 14 mm OES-6-3514 $7.00 
3.5mm x 16 mm OES-6-3516 $7.00 
3.5mm x 18 mm OES-6-3518 $7.00 
3.5mm x 20 mm OES-6-3520 $8.00 
3.5mm x 22 mm OES-6-3522 $8.00 
3.5mm x 24 mm OES-6-3524 $8.00 
3.5mm x 26 mm OES-6-3526 $9.00 
3.5mm x 28 mm OES-6-3528 $9.00 
3.5mm x 30 mm OES-6-3530 $9.00 
3.5mm x 32 mm OES-6-3532 $9.00 
3.5mm x 34 mm OES-6-3534 $9.00 
3.5mm x 36 mm OES-6-3536 $9.00 
3.5mm x 38 mm OES-6-3538 $9.00 
3.5mm x 40 mm OES-6-3540 $9.00 
3.5mm x 42 mm OES-6-3542 $10.00 
3.5mm x 44 mm OES-6-3544 $10.00 
3.5mm x 46 mm OES-6-3546 $10.00 
3.5mm x 48 mm OES-6-3548 $10.00 
3.5mm x 50 mm OES-6-3550 $10.00 


Pilot Hole Drills

1.5 mm OES-5-3015 $18.00
2.0 mm OES-5-3020 $18.00
2.5 mm OES-5-3025 $18.00


DCP Plates

2.0 mm
Code
 Holes
 Length
(mm)		 Width
(mm)
 Thick
(mm)
 Price
OES-2-2004
 4
 22
 5.0
 1.0
 $65.00
OES-2-2005
 5
 27
 5.0
 1.0
 $73.00
OES-2-2006
 6
 32
 5.0
 1.0
 $76.00
OES-2-2007
 7
 37
 5.0
 1.5
 $90.00
OES-2-2008
 8
 42
 5.0
 1.5
 $93.00

2.7 mm
Code
 Holes
 Length
(mm)		 Width
(mm)
 Thick
(mm)
 Price
OES-2-2702
 2
 20
 8.0
 2.5
 $45.00
OES-2-2703
 3
 28
 8.0
 		2.5
 $50.00
OES-2-2704
 4
 36
 8.0
 		2.0
 $55.00
OES-2-2705
 5
 44
 8.0
 		2.0
 $58.00
OES-2-2706
 6
 52
 8.0
 		2.0
 $68.00
OES-2-2707
 7
 60
 8.0
 		2.5
 $72.00
OES-2-2708
 8
 68
 8.0
 		2.5
 $75.00
OES-2-2709
 9
 76
 8.0
 		2.5
 $86.00
OES-2-2710
 10
 84
 8.0
 		2.5
 $96.00
OES-2-2712
 12
 100
 8.0
 		2.5
 $110.00

3.5 mm
Code
 Holes
 Length
(mm)		 Width
(mm)
 Thick
(mm)
 Price
OES-2-3504
 4
 50
 11
 4.0
 $55.00
OES-2-3505
 5
 63
 11
 4.0 $57.00
OES-2-3506
 6
 73
 11
 4.0 $60.00
OES-2-3507
 7
 86
 11
 4.0 $63.00
OES-2-3508
 8
 98
 11
 4.0 $66.00
OES-2-3509
 9
 110
 11
 4.0 $68.00
OES-2-3510
 10
 122
 11
 4.0 $69.00
OES-2-3511
 11
 133
 11
 4.0 $73.00
OES-2-3512
 12
 140
 11
 4.0 $76.00


L Plates
OES-3-2004L 2.0mm
 12mm x 20mm
 4 holes
 $29.00
OES-3-2004R 2.0mm
 12mm x 20mm
 4 holes
 $29.00
OES-3-2704L
 2.7mm
 13mm x 20mm
 5 holes
 $28.00
OES-3-2704R 2.7mm
 13mm x 30mm
 5 holes
 $28.00


T Plates
OES-3-2705T
 2.7mm
 12mm x 32mm
 5 holes
 $28.00
OES-3-2004T 2.0mm
 9mm x 17mm
 4 holes
 $29.00
OES-3-3506TL 3.5mm
 23mm x 45mm
 6 holes
 $29.00


Reconstruction Plates
OES-4-2030 2.0mm
 30 holes
 15 cm long
 $219.00
OES-4-2724
 2.7mm
 24 holes
 19 cm long
 $184.00


Bone Plate Benders

For 2.0 to 2.7 mm bone plates  OEL-JO-21-1124 $69.00 
Sold as a Pair


 
For 2.7 to 3.5 mm bone plates 
OEL-JO-21-1125 $78.00 
Sold as a Pair


Plate Holding Forceps
 
15 cm (6") OSU-29-013  $133.00
Designed to maintain plate position through a hole in the plate, the ball, just behind the point of the jaw, locates in the bone plate screw hole causing minimal interference elsewhere in the operation site. Also useful as reduction forceps in soft, young bone as the balls prevent over penetration of the bone.


Bone Plate Forceps
 
OES-29-643  $65.00


Maleolar Forceps
21 cm
(8 1/4")		 Straight OEL-FO-112 $153.00


Repositioning Forceps

13.5 cm (5 1/4")
OSU-29-213
$150.00


Twin Bone-holding Forceps

15 cm (6") Serrated
 OEL-J-213 $133.00


Repositioning Forceps
With Stepped Tips

9.5 cm (3 3/4")
OSU-29-212
 $119.00
13.5 cm (5 1/4") OSU-29-213 $130.00
19.5 cm (7 1/2") OSU-29-214 $144.00

The fine ratchet on these forceps allows very precise closure. The tips are stepped down to very accurate reduction without over penetration


Bone-holding Forceps

14 cm
(5 1/2")		 Serrated with point OEL-JO-21-777 $118.00


Bone Holding Forceps

Self-centering
12 cm (4 3/4") OEL-JO-21-820S $160.00
15 cm (6") OEL-FO-169 $165.00
20 cm (7 3/4") OEL-FO-170 $170.00
24 cm (9 1/2") OEL-FO-171 $175.00


Ulrich Bone Holding Forceps

11 cm (4 1/4") OSU-29-831 $149.00
18 cm (7") OSU-29-832 $157.00


Verbrugge Bone-holding Forceps

Self-retaining
19 cm (7 1/2") OEL-FO-179 $192.00
26 cm (10 1/4") OEL-FO-182 $220.00


Kern Bone-holding Forceps


Self-retaining with ratchet
12 cm (4 3/4") OSU-29-478 $105.00
17 cm (6 3/4") OEL-29-480
 $147.00
21 cm (8 1/4") OEL-29-482
$169.00


Reduction Forceps
 with thread fixation
24 cm (9 1/2") OEL-FO-125 $104.00


Martins Cartilage Forceps
 
14 cm (5 1/2") OEL-850-012 $95.00
19 cm (7 1/2") OEL-29-394/19 $102.00


Langenbeck Saw

23 cm (9") UN-B-001
 $72.00


Bone Saw

20 cm (8") MED-4990 $37.00


Bone Saw Blades
for MED-4990
4 blades per package - 7.5 cm (3”) in length
.12 X 3mm Fine MED-4900/1 $35.00
.25 X 5mm Large MED-4900/2 $40.00
.25 X 3mm Small
MED-4900/3 $43.00


Patella Saw with Blades

13 cm
(5 1/4")		 2 blades per package OSU-29-219 $104.00
Replacement blades each OSU-29-219A $8.00
Blades are Carbon Steel - Cold Sterile Only


Gigli Wire Saw

30 cm (12") U-91260 $ 9.00
40 cm (15") U-91262 $10.00
50 cm (19 3/4") U-91264 $11.00
70 cm (27 1/2") U-91266 $12.00
10 meter roll
(33 ft.)
$168.00


Gigli Wire Saw Handles

Sold as a pair
6 cm x 5 cm
(2 1/4" x 2")
 U-91252 $23.00


Saw Blades
(Set of 4)
OEL-07-SBL $46.00 
All saws fit the #3 Scalpel Handle. The blades are very thin (0.25mm) making them suitable for a variety of small bone cutting procedures.


Bluementhal Bone Rongeur

15 cm (6") OEL-820-01 $95.00


Friedman Bone Rongeur
 
14 cm (5 1/2") OEL-820-10 $102.00
12.5 cm (5") OEL-820-10S $97.00


Luers Bone Rongeur

Curved single action, medium sized spoon
15 cm (6") Blunt Jaw OEL-820-11 $97.00


Lempert Ronguer

Bone Nibbling Forceps
19 cm (7 1/2") Straight
 OEL-29-530 $191.00
19 cm (7 1/2") Curved OEL-29-532 $196.00


Echlin Duckbill Ronguer

Used for trimming and recontouring alveolar bone and gross tissue removal.
23cms (9”) OSU-820-30 $190.00


Ruskin Bone Rongeur

18 cm
(7")		 Double Action - Curved OEL-29-560 $190.00


Ruskin-Liston Bone-cutting Forceps

18 cm
(7")		 Double Action - Straight
 OEL-29-620 $220.00
18 cm
(7")		 Double Action -
Curved 		OEL-29-622 $220.00


Liston Bone Cutting Forceps

14 cm (5 1/2") Straight
 OEL-29-600 $170.00
17 cm (7") Straight OEL-29-602 $185.00
14 cm (5 1/2") Curved OEL-29-610 $170.00
17 cm (7") Curved OEL-29-612 $185.00


Bohler Bone-cutting Forceps

14 cm
(5 1/2")		 Double Action-Straight
 OSU-29-958 $200.00
14 cm
(5 1/2")		 Double
Action-Curved 		OSU-29-959 $200.00


Small Angled Bone Cutter

15 mm blade
6 ½” (17 cm) length		 OEL-29-223 $125.00
Especially used for small dogs and cats. The jaws have the ideal size & angle for Femoral Head Excision, Tibal Crest Translocation and many other small bone cutting procedures.


Trochlear Bone Rasp

To remodel the femoral trochlear groove
in patella luxation
17 cm (6 3/4") OSU-29-210 $99.00


Putti Bone Rasp

27 cm
(10 3/4")		 Flat - Double ended OEL-FK-505 $132.00


Putti Bone Rasp

28 cm
(11")		 Round/Flat
Double ended 		UN-91472 $132.00


Foman Bone Rasp

Double-ended rasp with convex & flat files.
Coarse teeth on one side & fine on the other.
21 cm (8") OSU-29-189 $102.00


Excision Arthroplasty Rasp

The fine head on the rasp allows for easy removal of bone spurs or rough edges in a femoral head excision. The rasp cuts only on the backward stroke.
17 cm (6 3/4") OSU-21-1137 $66.00


Femoral Head Disarticulator
Used to engage and sever the round ligament during total head and neck excision
<>14 cm (5 1/2”) OEL-29-706S $66.00
<>19 cm (7 1/2”) OEL-29-706L $96.00


Smilies Menisectomy Knife

Curved Tip
16 cm (6 1/4") Small
 		OSU-29-132/00 $99.00
17 cm (6 3/4") Medium OEL-29-132/02 $102.00


Michele Trephine

3 mm I.D.
5 mm O.D.		 Small
 OEL-29-703 $93.00
4 mm I.D.
6mm O.D.		 Medium
 OEL-29-704 $101.00
6 mm I.D.
8mm O.D.		 Large
 OEL-29-705 $109.00


Willigar Bone Curette

14 cm
(5 1/2")		 Double - ended
(0/00)
 OSU-29-277 $57.00
14 cm
(5 1/2")		 Double - ended
(0/1)
 OSU-29-278 $45.00


Volkman Double-Ended Bone Curette

13 cm (5") Oval / Oval
 OEL-29-260 $37.00
16.5 cm (6 1/2") Oval / Oval OEL-29-262 $43.00
16.5 cm (6 1/2") Round / Oval OEL-29-272 $43.00
20 cm (7 3/4") Round / Oval OEL-29-274 $50.00


Volkmann Bone Curette
17 cm (6 3/4")
3.5mm X 4.35mm OEL-29-240/0000 $37.00
4.0mm X 5.60mm OEL-29-240/000 $37.00
5.0mm X 7.25mm OEL-29-240/00 $37.00
6.5mm X 8.75mm OEL-29-240/0 $37.00
6.3mm X 9.10mm OEL-29-240/1 $37.00
8.5mm X 11.7mm OEL-29-240/2 $37.00
8.7mm X 12.7mm OEL-29-240/3 $37.00
11.0mm X15.5mm OEL-29-240/4 $37.00


Williger Periosteal Elevator

17 cm (6 3/4") OEL-29-340 $35.00


Freer Periosteal Elevator

21 cm  (8 1/4”) MED – 887 $38.00 


Hohlman Retractor

Mini
  6 1/4" long 		OEL-FK-118 $45.00
08 mm (1/4")
x 9 1/2" long 		OEL-29-390 $61.00
18 mm (3/4")
x 9 1/2" long 		OEL-29-392 $61.00


US Army Retractors
(Set of 2)
8 ½ ” (22 cm) long OEL-21-11/122 $87.00


Stille Bone Osteotome
 
20 cm X 10 mm
(7 3/4" x 3/8")
 		OEL-29-170
 $60.00
20 cm X 15 mm
(7 3/4" x 1/2") 		OEL-29-172 $64.00
20 cm X 20 mm
(7 3/4" x 3/4") 		OEL-29-174 $68.00


Flat Chisel
 
13.5 cm x 4 mm
(5 1/4" x 5/32")
 		OEL-29-149-4 $51.00
13.5 cm x 6 mm
 (5 1/4" x 7/32")
 OEL-29-149-6 $55.00
13.5 cm x 8 mm
 (5 1/4" x 5/16")
 OEL-29-150 $60.00
13.5 cm x 10 mm
 (5 1/4" x 3/8")
 OEL-29-152 $63.00


Lambotte Chisel

12.5 cm x 4 mm
(5" x 1/4")
 		OEL-FL-101 $63.00


Williger Bone Mallet

24 cm x 30 mm
(9 1/2" x 1 1/4")")
 		OEL-29-200-3 $83.00


Hajek Bone Mallet

22 cm
(8 3/4")		 Stainless Steel
140 gr.
 		OEL-FL44 $114.00


Collins Bone Mallet

20 cm
(7 3/4")		 Stainless Steel
 OEL-29-220 $83.00


Mallett
with interchangeable Delrin heads – 140 gr.
Mallett OEL-FL36 $162.00
Replacement heads OEL-FL37 $ 17.00